RBM Oil Corporation supplies one radiator coolant, RBM DURATIC Radiator Coolant (in 1:1, 1:3 and 1:5 levels), and a cutting-oil coolant range for machine shops, both dispatched from its Pune plant. The two product families solve completely different thermal problems, so this page separates them clearly.
The catalogue lists DURATIC as a radiator coolant in 1 L, 3 L, 5 L, 20 L, 55 L and 210 L packs and does not label it as antifreeze. [Draft note for RBM before publishing: confirm base chemistry, inhibitor technology, colour, boiling point and what 1:1 / 1:3 / 1:5 levels signify.]
Two things buyers call "coolant"
| Comparison | Radiator coolant | Machining coolant |
|---|---|---|
| Used in | Engine cooling circuits: cars, trucks, generators | CNC machines, lathes and precision grinding shops |
| RBM product | RBM DURATIC Radiator Coolant | Robust cutting oils: mineral (2000, 3000); semi-synthetic (6000, 8500, 9000, 9500, 10000, 11000, 12000); plus Neat Cutting, Honing, Broaching and EDM oils |
| Levels or grades | 1:1, 1:3, 1:5 [RBM to explain what each level means] | Dedicated grade numbers (2000–12000) in 20 L, 26 L, 50 L, 55 L, 210 L and bulk |
| Pack sizes in catalogue | 1 L, 3 L, 5 L, 20 L, 55 L, 210 L | 20 L, 26 L, 50 L, 55 L, 210 L and bulk/loose |
| Enquiry form category | Automotive Fleet Oils | Metalworking & Coolants |
| Check before buying | Engine maker's coolant spec and approved vehicle classes | Machine tool OEM guidance and recommended emulsion dilution ratio |
Explore the Automotive Lubricants catalogue, the Industrial Lubricants & Cutting Oil range, or read our guide on how a 4-stroke engine manages heat and lubrication.
Why Pune engines still need dedicated coolant
Pune rarely drops below freezing, so the job here is protection against summer traffic boil-over, water-pump cavitation and internal radiator corrosion rather than frost protection. [Draft note: insert boiling-point and corrosion protection figures from DURATIC TDS before publishing.]
Five checks when you top up or change coolant
- Use the coolant specification named in your owner's manual; do not mix incompatible chemistries.
- Top up only when the engine is cold; never open a pressurised radiator cap while hot.
- Dilute using distilled or demineralised water when mixing concentrate so mineral scale does not form.
- Top up with the same grade, or drain and flush the circuit completely before changing product lines.
- Replace at the manual's service interval, or earlier if the fluid turns rusty or cloudy.
How to order
- Submit an enquiry on our contact page choosing Automotive Fleet Oils or Metalworking & Coolants, call +91 90213 62167, or email sales@rbmoilcorporation.in.
- Orders inside Maharashtra ship in 24–48 hours from Punawale, Pune. [RBM to confirm domestic MOQ and Pune delivery areas.]
Questions buyers ask
Is DURATIC an antifreeze?
The catalogue lists DURATIC strictly as a radiator coolant. [RBM to confirm chemistry before publishing.]
What do 1:1, 1:3 and 1:5 mean?
[RBM to explain whether 1:1, 1:3 and 1:5 are concentrate dilution ratios or pre-blended strengths, with a 1-litre worked example.]
Which vehicles can use DURATIC?
[RBM to list approved vehicle classes. Do not publish this blank as "all vehicles".]
Can a machine shop use DURATIC?
No. Machine shops require metalworking cutting fluids such as the RBM Robust series listed above.
Can I get a datasheet or SDS?
Yes, by email request to sales@rbmoilcorporation.in or from the product page.
